KCB gear pump
It applies to delivering non-corrosive lubricating-lil or
equivalent liquid without solid pareicles and fibres at temperature
bilow 80℃ and with the viscosity of 5×10-6～1.5×10-3m2/S(5-1500cSt).
It can give performance as transferpump or booster pump in oil
delivery system.It can be also applied as a fuel pump for dilivery
system,pressurization and injection in fuel supply system and in
all industry fields as lubricating pump.
KCB series gear pumps are mainly composed of gears,axles pump
body,pump,cap safety valve and axle-end seals etc.The heattreated
gears have the advantage of higher hardness and intensity,and
rotate with the axles inside the replaceable bearing sleeves.All of
pump's parts can be lubricated by delivered medium when working.
The pump is properly designed with leakage and return chute,which
lets the gears bear the least torque force and reduces load and
wear on bearings bear the least torque force and reduces load and
wear on bearings in order to raise pump's efficiency.
It is also designed with safty valve for protection against
overload.The full return flow pressure of the safety valve is
1.5times higher than the rated exhaust pressure of the pump.It can
be also adjusted within the allowance of exhaust pressure range
according to circumstances .But please note the safty valve can't
be applied as pressure-reducing valve for long time .You may
install pressure-reducing valve separately on pipe-line if needed.